Kishigo
Home

ANSI/ISEA 107-2026: Why Fit and Sizing Matter More Than Ever

ANSI/ISEA 107-2026: Why Fit and Sizing Matter More Than Ever

November 10, 2026

A safety manager orders Type R, Class 2 high-visibility vests for a crew. When the garments arrive, however, a smaller-framed worker finds that even the smallest available vest hangs too low and leaves excess fabric around the shoulders.

Although the vest meets the appropriate ANSI classification, it doesn't fit the worker properly. This is exactly the type of challenge addressed by the newly approved ANSI/ISEA 107-2026 standard, which updates sizing provisions to better accommodate smaller workers.

Key Takeaways

  • ANSI/ISEA 107-2026 provides more flexibility for smaller Type R garments. The previous edition allowed reduced background-material requirements for the smallest size in a garment design. The 2026 update clarifies when those reduced requirements can apply to smaller sizes through medium.
  • An ANSI-compliant garment may still fit an individual worker poorly. Oversized apparel can shift, snag, or interfere with equipment, while garments that are too tight can restrict movement. Employers need to evaluate fit during the tasks workers actually perform.
  • The right fit depends on garment dimensions and design, not just the size label. Comparing size charts, evaluating different cuts, and having workers try on garments can help safety managers find appropriate options for employees who aren't well served by standard unisex sizing.

What Changed About Sizing in ANSI/ISEA 107-2026?

ANSI/ISEA 107 establishes performance requirements for high-visibility safety apparel used in roadway, non-roadway, and public safety environments. Among other things, the standard specifies minimum areas of fluorescent background material and retroreflective material based on garment Type and Performance Class.

Under ANSI/ISEA 107-2020, manufacturers could use a reduced minimum area of background material for the single smallest size offered in a Type R Class 2 or Class 3 garment design.

The new edition expands that flexibility. According to the International Safety Equipment Association (ISEA), ANSI/ISEA 107-2026 clarifies when reduced background-material requirements can be used for smaller Type R garments, up to and including size medium.

A smaller-framed worker naturally needs a smaller garment, which has less surface area available for fluorescent material. Requiring the same amount of material used in larger garments can introduce unnecessary bulk and make proper fit more difficult. The updated requirements account for these differences while maintaining the standard's visibility and performance requirements.

These provisions address how high-visibility garments are designed and evaluated. Whether a particular garment fits the employee wearing it remains a separate consideration during PPE selection.

Why an ANSI-Compliant Garment May Still Fit Poorly

A high-visibility garment may carry the appropriate ANSI classification but still create problems when an employee wears it on the job:

  • Distractions and lost productivity: When a loose vest twists, shifts, or rides up, workers may need to repeatedly pull it back into place. These constant adjustments can interrupt their work and divert attention from the task at hand.
  • Interference with work: Excess fabric can catch on nearby objects or interfere with tools and equipment. Garments that are too tight may restrict reaching, bending, or other routine movements.
  • Improper use: Workers may leave closures open or make unauthorized modifications to compensate for poor fit.

OSHA also recognizes the importance of proper PPE fit. Under 29 CFR 1926.95(c), construction employers must select PPE that properly fits each affected employee. 

Why Garment Design Matters as Much as Size

One common response to oversized PPE is to order a smaller size. Sometimes that works, but when the underlying problem is garment shape, reducing the overall dimensions may create a different fit issue.

Consider two employees who both wear size small. One has broad shoulders and a shorter torso. The other has narrower shoulders and a longer torso. Although both request the same size, the same garment may fit them very differently.

The National Institute for Occupational Safety and Health (NIOSH) has emphasized the importance of considering differences in workers' body sizes and shapes when designing and selecting PPE. This is particularly relevant for women and smaller-framed workers who may struggle to find appropriate options in traditional unisex sizing.

Simply sizing down a men's vest, for example, may reduce the overall width while leaving the shoulders too broad. A garment may also fit around the chest but feel restrictive at the hips, or provide adequate waist room while hanging too low.

Women's-specific designs can address these differences through narrower shoulders, contoured waists, adjusted garment lengths, and other design details.

Still, women's-specific apparel isn't automatically the best fit for every woman, just as a unisex garment isn't necessarily inappropriate. What matters is whether the garment's dimensions and design accommodate the individual worker.

How to Evaluate Hi-Vis Fit Before Issuing Garments

When comparing high-visibility apparel, safety teams can use these five checks to evaluate garment fit before issuing it to workers:

1. Review Actual Garment Dimensions

Don't assume a medium from one product line fits the same as a medium from another. Compare manufacturer size charts, including garment length, chest measurements, and available cuts. When reviewing substitutions or repeat orders, check the specific garment dimensions so a change in style doesn't introduce unexpected fit problems.

2. Evaluate Fit on the Individual Worker

Have employees try on garments over their normal work clothing. Check whether the shoulders sit appropriately, the closures fasten comfortably, and the garment provides enough room without excessive loose material.

3. Observe Normal Work Movements

Ask employees to reach overhead, bend, crouch, and turn. Watch for fabric that bunches, shifts, or restricts motion. Consider how additional equipment, such as tool belts or harnesses, interacts with the garment.

4. Ask Workers About Fit Problems

Ask workers whether the garment moves out of place, interferes with tools, or requires frequent adjustment throughout the shift.

5. Consider Alternative Garment Designs When Necessary

If the smallest stocked vest is still too large, ordering more of the same won't solve the problem. Compare garments with different proportions, including women's-specific or smaller-frame options. The same principle applies to larger workers who need a less restrictive cut.

These fit checks complement, rather than replace, checking the garment's ANSI/ISEA Type, Performance Class, and referenced standard edition. A garment's labeled size alone doesn't establish conformance.

How Kishigo Designs High-Visibility Workwear for a Better Fit

When standard hi-vis apparel doesn't fit properly, workers shouldn't have to choose between safety and comfort. Kishigo designs high-visibility workwear with different body proportions and job requirements in mind, giving safety teams more options for outfitting their crews.

Kishigo addresses common fit challenges through:

  • Garment designs for different body proportions: The Women's Ultimate Construction Vest (1824) features a contoured, tapered cut and scooped hem, while the Men's Ultimate Construction Vest (1823) offers a more traditional fit. 
  • Comfort and mobility: Features such as tailored cuts, breathable mesh, and thoughtful garment construction help reduce unnecessary bulk and allow workers to move more comfortably throughout the day.
  • Options for different roles, conditions, and sizes: A wide range of Kishigo's workwear is available in size small, and its women's workwear collection includes construction vests, surveyor vests, Class 3 vests, and outerwear.

The right garment should fit the worker while supporting the tasks they perform. Request a quote through Kishigo's partner network to compare styles and find high-visibility workwear options that better meet your crew's sizing and job requirements.

Frequently Asked Questions About ANSI/ISEA 107-2026

Does ANSI/ISEA 107-2026 Require Women's-Specific High-Visibility Apparel?

No. The standard does not require manufacturers to offer women's-specific garments. However, the updated sizing provisions support the development of properly proportioned apparel for smaller workers. Employers must still evaluate whether their selected garments fit individual employees appropriately.

Does OSHA Require Employers to Provide Properly Fitting Hi-Vis PPE?

Yes, where high-visibility apparel is required PPE, applicable OSHA fit requirements must be met. 29 CFR 1926.95(c) explicitly requires construction employers to select PPE that properly fits each affected employee. General industry employers have a corresponding requirement under 29 CFR 1910.132.

How Can Buyers Verify That Smaller Hi-Vis Garments Meet ANSI/ISEA 107-2026?

Check the garment's label for its ANSI/ISEA edition, Type, and Performance Class. Buyers can also request the manufacturer's Declaration of Conformity for the specific style or model. A small or medium size label alone doesn't establish that a garment meets the updated requirements.